Boluo shiwan skyringe craft factory
Industry News

How to bond steel plate and plexiglass

How to bond steel plate and plexiglass

1. How to bond the steel plate and the plexiglass is required for the test. To bond the plexiglass and the steel plate, it is required to be impermeable to water. Can epoxy resin be used to bond it? It is also possible to use silicone or polysulfide glass glue?

2. How can plexiglass be cut neatly

The 3mm thick plexiglass plate needs to be neatly cut into pieces. It is too troublesome to use a saw, and it cannot be cut with a blade, which is very distressing. Experts help out.

Question added: But plexiglass crafts are different from ordinary glass, they have certain toughness. Glass knives may not be able to do anything.

Use a section of a scrap hacksaw blade and grind one end with a grinding wheel into a hook-shaped blade like a planer. Why use a scrap hacksaw blade? It is because the front hacksaw blade is not only high in hardness, but also easy to grasp. On the plexiglass, use a long steel ruler for positioning, use the hook edge of the saw blade, close to the steel ruler, and pull it step by step, just like a planer, and it can be pulled through after a while. This saw blade is also effective for cutting insulation boards.

3. Plexiglass is easy to crack when perforated, what should I do?

Use an ordinary twist drill bit, grind it into a three-pointed shape, and the point in the middle is slightly higher, so that the drill bit can drill the plexiglass well. There is no way to draw a pattern here, ask a fitter or a driller, that is, the kind of drill that drills thin iron. Or use a hand-crank drill. When drilling, the force should be uniform, and the pores left under the glass plate should be small to enhance the strength of the glass. You can also put some sand on the glass to increase the friction.

Maintenance skills of plexiglass products

1. Cleaning, plexiglass handicrafts, if they are not treated with special treatment or added with a hard-resisting agent, the product itself will be easily worn and scratched. Therefore, for general dust treatment, it can be washed with a chicken blanket or clean water, and then wiped with a soft cloth. If the surface is greasy, you can add water with a soft detergent and scrub it with a soft cloth.

2. Waxing, if you want the product to be bright and bright, you can use liquid polishing wax and wipe it evenly with a soft cloth to achieve the purpose.

3. Adhesion, if the product is accidentally damaged, you can use a dichloromethane-based adhesive or a quick-drying agent to attach it.

4. Polishing, if the product is scratched or the surface wear is not very serious, you can try to use a polishing machine (or a car waxing machine) to install a cloth wheel, dip an appropriate amount of liquid polishing wax, and polish it evenly to improve.
Contact us now
Boluo shiwan skyringe craft factory
260 Mingyue 2nd Road, Shiwan Town, Boluo County
You can trust us
We are a professional manufacturer in China. We continue to innovate so that our customers can have better products and services.
© Boluo shiwan skyringe craft factory    RELATED ARTICLES     Terms & Conditions        Privacy     
SiteMap   |   ClearCache
Enter your inquiry details and we will reply to you within 24 hours.
Name cannot be empty
Mailbox cannot be empty
Company cannot be blank
Mobile phone cannot be empty
Country cannot be empty
Information cannot be empty